PIPE ON PIPE
PRODUCT DATA _________________________________________________________________________________________________________
BOSS-155 is a concentrated blend of amide and imidazoline fatty acids with oil wetting surfactants. BOSS-155 is effective at reducing friction during horizontal and directional drilling. BOSS-155 disperses easily into any system. BOSS-155 reduces sliding time in half in most case histories. BOSS-155 reduces torque and drag, casing wear, wall sticking tendencies, and bit and bottom hole assembly balling. BOSS-155 will not damage any elastomers of down-hole motors.
Typical physical properties
Appearance: Aromatic Odor - Dark brown liquid
Specific Gravity: 0.9963
Active Content: 70-75%
Density:7.9lbs a gal
Dispensability:100% OBM and 99% WBM with agitating
High Torque, Excessive Hook-Load, or Difficulties Sliding: BOSS-155 should be used in sweep form or to the entire system. Add 2-5% by volume to a 80-100 barrel
slug tank. Pump 10-25 bbl sweeps as needed to solve the above problems.
Running Casing: Calculate 2-5% of BOSS-155 and spot the pill in the open hole ensuring that the top of the curve is where the top of the pill lands.
Stuck Pipe: Calculate 2-5% of BOSS-155 when the pill covers the stuck assembly and pump until the area is covered leaving a minimum of 20 bbls in the drill string. Pump 1 bbl every hour while working pipe free until desired results are achieved. Repeat procedure if necessary two more times to free pipe.
Handling and Storage
Observe normal precautions for industrial chemicals. Keep away from heat, sparks, and open flames. For more information, see material safety data sheet.